CUSTOM COLOR SPRAY PAINT (RAL & PANTONE)
CUSTOM COLOR SPRAY PAINT (RAL & PANTONE)
7CF® Custom Color Spray Paint is made from thermoplastic acrylic resin and it can be applied by aerosol spray and provide films with excellent performance such as excellent weather resistance, good levelling, strong coverage, fast dry, high build, and match well with many types of primers. We provide many colors ( RAL Colors & PANTONE Colors) or customized colors.
WHERE TO BUY
RAL -1015-Light Ivory
RAL -1015-Light IvoryRAL -3003-Ruby redRAL -3005-Wine RedRAL -7004-Signal GreyRAL- 8017-Chocolate BrownRAL- 9005-Jet BlackRAL -9006-White AluminiumRAL-3020-Traffic RedRAL-5005-Signal BlueRAL-6005-Grey Green
For more colors, please download the 7CF color card, welcome to customize the colors you need.
CUSTOM COLOR SPRAY PAINT FEATURES & BENEFITS
Fast drying
Simple operation
Good spray atomization
High spray rate
High film fullness
Excellent decorative effect
Superior adhesion and durability
Available for many different colors (RAL Colors & PANTONE Colors) or customized colors.
CUSTOM COLOR SPRAY PAINT FEATURES & BENEFITS
CUSTOM COLOR SPRAY PAINT APPLICATIONS
Widely used for all interior/exterior applications, for surface finishing of iron & steel, plastics, metals, surface-treated wood, glass, etc.
Household items: shelf, bench, chair, table, vase, refrigerator, fan, bicycle, helmet, motor, stationery holder, wicker chair, petrified plants, DIY.
Agricultural equipment: garden tools, fence, etc.
Automobiles.
Industrial fields.
Plumbing fixtures.
DIRECTION
1
Thoroughly remove dirt, grease, oil, and water on the surface to be painted.
2
Fill the recessed part with Poly-Putty Base and smooth it.
3
Shake can vigorously for two minutes after the mixing ball begins to rattle until the paint is fully mixed and uniform.
4
Hold can upright 20-30cm from surface and use your index finger to press down the nozzle to spray in a steady back and forth motion.
5
Apply in thin multiple layers, thin layers applied every 2 minutes are always better than one thick layer.
6
If the spray is not finished at one time, turn the bottle upside down and press down the nozzle for 3 seconds to clean out the valve and prevent plugging.
PHYSICAL & CHEMICAL PROPERTIES
Item
Standard
Remark
Appearance
Film flat and smooth, no mechanical impurities, accord with the confirmed sample.
Eye test
Drying condition
Touch dry ≤15 minutes,
Finger press dry ≤ 1 hour
Under the temperature of 20℃
Recommended Thickness
18-25µ
–
Volume Solid
15-25%
–
Specific Gravity
0.90-1.15
–
Adhesion
≤2
Circle Testing
Hardness
≥HB
Dry after 48 hours
(Room Temperature)
Gloss
Gloss ≥80; Matt accord with the confirmed sample
60℃ gloss level, relative moisture ≤ 75%
Flexibility
≤1mm
–
Spraying rate
≥98%
–
Shelf Life
Three Years
–
PACKAGING SPECIFICATIONS
ITEM NO.
Container size
Optional sizes
A-S-008
10oz(283g)
8oz(226g), 9oz(255g)
