HAMMER FINISH SPRAY PAINT
7CF® Hammer Finish Spray Paint is a quick-drying alkyd aerosol paint, the paint film has an uneven hammer finish effect, excellent adhesion, flexibility, impact resistance, excellent decoration effect, and good protection function.
Hammer Finish-A00 SILVER
Hammer Finish-A00 SILVERHammer Finish-A03 BROWNHammer Finish-A11 GREYHammer Finish-A12 MEDIUM YELLOW GREENHammer Finish-A13 DEEP GREENHammer Finish-A18 BLUEHammer Finish-A19 GOLDHammer Finish-A22 PURPLE
For more colors, please download the 7CF color card, welcome to customize the colors you need.
7cf-color-card
TDS & SDS
HAMMER FINISH SPRAY PAINT FEATURES & BENEFITS
Provide films with hammer finish effect
Excellent durability indoors and outdoors
Fast drying
Superior corrosion resistance
Great for metal, wood, glass, and more
HAMMER FINISH SPRAY PAINT FEATURES & BENEFITS
HAMMER FINISH SPRAY PAINT APPLICATIONS
It is widely used in the coating of various metals, surface-treated wood, glass, ceramics, and other objects, such as machinery, steel door, theft-proof window and door, electronic tools, medical equipment, handicrafts, etc.
DIRECTION
1
Thoroughly remove dirt, grease, oil, and water on the surface to be painted.
2
Fill the recessed part with Poly-Putty Base and smooth it.
3
Shake can vigorously for two minutes after the mixing ball begins to rattle, until the paint is fully mixed and uniform.
4
Hold can upright 20-30cm from surface and use your index finger to press down the nozzle to spray in a steady back and forth motion.
5
Apply in thin multiple layers, thin layers applied every 2 minutes are always better than one thick layer.
6
If the spray is not finished at one time, turn the bottle upside down and press down the nozzle for 3 seconds to clean out the valve and prevent plugging.
PHYSICAL & CHEMICAL PROPERTIES
Item
Standard
Remark
Resin Type
Alkyd Resin
–
Pigment Type
Varies with color
–
Appearance
Film flat and smooth, no mechanical impurities, accord with the confirmed sample.
Eye test
Drying condition
Touch dry ≤30minutes,
finger press dry ≤ 2 hours
Under the temperature of 20℃
Recommended Thickness
18-25µ
–
Volume Solid
15-25%
–
Specific Gravity
0.90-1.15
–
Adhesion
≤2
Circle Testing
Hardness
≥HB
Dry after 48 hours
(Room Temperature)
Gloss
Gloss ≥80; Matt accord with the confirmed sample
60℃ gloss level, relative moisture ≤ 75%
Flexibility
≤1mm
–
Spraying rate
≥98%
–
Practical Coverage at Recommended DFT
(assumes 15% material loss)
0.8-1.2 m2 /can
–
Dry Heat Resistance
200°F (93°C)
–
Flash Point
-156°F (-104°C)
–
Shelf Life
Three Years
–
PACKAGING SPECIFICATIONS
ITEM NO.
Container size
Optional sizes
A-S-004
10oz(283g)
8oz(226g), 9oz(255g)
