Process Automation
EMC has been the sole New Zealand representative for Endress+Hauser for over 45 years. Endress+Hauser is a global leader in measurement instrumentation, services and solutions for industrial process engineering. They provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimising processes in terms of economic efficiency, safety and environmental impact. Our long relationship with E+H has ensured our customers have received the best ongoing support and reliable continuity of supply for several decades. Their complete product portfolio means we practically do not sell any other instrumentation brands which allows us to support the E+H range better and to focus on our core business of servicing our customers the best we can.EMC is New Zealand’s largest manufacturer of Belt Weighers and Weighfeeders; something we’ve been proudly doing for almost 50 years. Our Weighing processors (Modweigh) are also developed and manufactured in NZ and not only supplied locally but also exported globally. In addition, we also supply tank and silo weighing systems with quality loadcells from Scaime and loadcell mounts from Thames Side and our own EMC range. We also provide on-site servicing and commissioning for all our Weighing products.Endress+Hauser is not restricted by a limited number of measurement principles and can, therefore, offer the method best suited to your particular application in either liquids or bulk solids. We’ll carefully listen to your requirements and then offer the best suited and most cost-effective solution. We also offer onsite assistance with commissioning to ensure the instrument is installed correctly and performing as required. Continuous level measurement and point level detection in liquids and solids with capacitance probes.Capacitance level measurement is a simple and cost-effective solution for level monitoring in liquids. Particularly in small tanks and build-up forming media. Point level detection works for both liquids including aggressive media, and solids with a heavy-build up the possibility. Contact us to learn more about the broad range of capacitance level sensors to suit your application. The principle of capacitance level measurement is based on the capacitance change of a capacitor. The probe and the tank wall form a capacitor whose capacitance is dependent on the amount of product in the tank. An empty tank has a lower capacitance in comparison to a full tank.For more info: https://www.emc.co.nz/https://www.emc.co.nz/products/pressure-instruments/