Slient Check Valve
Basic information of Slient Check Valve
This valve is installed at pump outlet to prevent backflow of medium and reduce noise and water hammer of water system.
Features of Slient Check Valve
1. Flexible opening and closing, with grease sleeve between guide shaft and guide frame;
2. The disc opens and closes short stroke to prevent water hammer;
3. Fluid flow smooth, local head loss small;
4. Simple structure and convenient maintenance.
Principle of Slient Check Valve
This valve works automatically, and the disc opens under the action of fluid pressure flowing in one direction. When the fluid is flowing in the opposite direction, the pressure of the fluid and the self-aligning disc of the disc act on the seat to cut off the flow. It is not suitable for medium containing solid particles and high viscosity. When the medium flows in the specified direction, the disc is opened under the action of medium force. When the medium reverse flow, because of the disc self-weight and disc by the medium reverse force, so disc and seat sealing surface close and closed.
Installation and Commissioning of Slient Check Valve
in the line. Large check valves should be independently supported to protect them from pressure from piping. For specific use, please consult ZECO Valve Group.
Product scope, Standards & Materials of Slient Check Valve
Size Range: 2″~20″
Pressure Rating: 10bar ~ 25bar
Face to Face Dimensions: AMSE B16.10,EN558-1
Flange End Dimension:AMSE B16.1/16.42,AS4087,EN1092-2Coating: Fusion Bonded Epoxy Coating
Inspection and Test: ISO 5208/EN 12226-2
Part
Material
Standard
Body
Ductile lron
EN1563/DIN 1693
Disc
Stainless Steel 431
EN10088-1/ASTMA959
Stem
Stainless Steel 431
EN10088-1/ASTMA959
Seal
EPDM/NBR
ISO 4633
Nut
CuZn39Pb1/C37000
EN12167/ASTM B135
spring
stainless Steel 431
EN10088-1/ASTM A959
For the materials options not listed, consult factory.ZECO manufactures valves in more than 50 different alloys.